Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Henderson
If you live in Henderson and your heat just stopped, call us at (844) 320-2997. We connect you with local professionals who work on furnaces and heat pumps in Green Valley, MacDonald Ranch, Anthem, and the older tract streets around downtown Henderson, and who already know what the equipment in this town tends to do. That matters more than people realize. A furnace problem in a 1990s tract house off Warm Springs Road isn’t the same call as a heat pump issue in a newer Anthem build, and only someone who works here every winter knows the difference.
Why Meadowsweet Heating & Air North Las Vegas Is Henderson’s Preferred Furnace Repair Company
Henderson has a lot of HVAC companies to choose from, and we earn our repeat calls by being clear, careful, and accountable. Every visit starts with a written price before any work begins, and every job is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right, with no runarounds and no fine print. That promise is part of the Cedarwell Care Promise that shapes how we work.
The technicians who arrive at your door are background-checked, wear shoe covers, and lay drop cloths before they touch a thing. We follow the C.A.R.E. values by name – clean up like it’s our own home, ask before moving anything, respect your family’s time and quiet hours, and explain the price before the work. A live person answers the phone 24 hours a day, seven days a week, so you’re never routed to voicemail at midnight when the heat has quit. Our technicians have up to 22 years of experience, and they’ll show you a photo of the cleaned-up space before they leave your Henderson home.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Furnace Maintenance in Henderson
Furnace Maintenance in Henderson tends to get forgotten until the first cold night brings a no-heat call, and the reason is simple: furnaces here sit mostly idle for eight months while the system runs cooling duty nearly year-round. A tune-up covers a filter and blower check, burner and heat exchanger inspection, ignitor and gas valve testing, and a static pressure reading to see whether your ductwork is starving the equipment. You need one before the heating season starts – usually October or early November in Henderson – especially if your home is in 89014 or 89015 tract stock and the equipment is original. A tune-up in Henderson runs $80 – $200.
What a Tune-Up Actually Checks
It’s an inspection first and an adjustment second. A technician checks static pressure and airflow, confirms the ignitor and flame sensor are working, looks at the heat exchanger, and tests the blower motor. Any adjustment comes with a written price before the technician makes a change.
Why Timing Matters Here
Henderson’s heating season arrives quickly once it does. Booking a tune-up in October gives you room to fix something small before the nights drop near freezing, rather than paying for a same-night repair call in December.
Heat Pump Repair in Henderson
Heat Pump Repair in Henderson calls come in heavily from the newer master-planned communities on the south and east sides – ZIPs 89052 and 89012 especially – where tight envelopes and high-efficiency equipment change how a heating failure shows up. In those homes, a heat pump that runs but won’t warm the house is more often a defrost reversing-valve problem or failed auxiliary strips than a gas burner issue. That’s a different diagnosis than a 1990s tract-home furnace failure. Repair costs in Henderson typically run $150 – $700.
Defrost and Reversing Valve Issues
When a heat pump can’t switch properly between heating and defrost cycles, the air coming out of the vents stays cool. Diagnosing it takes a pressure check and a look at the reversing valve, and the fix is usually a targeted part replacement rather than a full system swap.
Auxiliary Heat That Never Kicks In
High-efficiency heat pumps in newer Henderson construction lean on auxiliary strips when outdoor temps drop. If those strips or the sequencer that stages them fail, the house feels lukewarm even with the system running. Testing the strip circuit is the first step.
Trusted Brands We Service in Henderson
We work on Carrier, Bryant, Daikin, and American Standard equipment, along with five other major brands. We don’t claim to keep parts stocked locally – what we do is diagnose accurately and get the right part quickly, so your Henderson repair doesn’t drag on. Because our technicians have up to 22 years of experience across all nine brands, you’re not bouncing between three different companies trying to find someone who’ll work on your Daikin heat pump or your older Bryant furnace. One visit, one diagnosis, one written price.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Henderson Homes
- Builder-grade equipment sized by rule of thumb. In Henderson subdivisions, many furnaces and heat pumps were never properly load-calculated. Tonnage and static pressure are off from day one, and the heat exchanger or blower motor wears out early as a result.
- Attic flex duct crushed or disconnected. Original installers in Henderson let flex duct sag and kink in the attic. That drives static pressure up and starves the blower motor and heat exchanger of airflow, which is often the real cause of a no-heat call.
- Cracked heat exchangers on 1990s equipment. Original furnaces in tract stock around 89014 and 89015 are now 20 to 30 years old, and a cracked heat exchanger often only surfaces when the first cold snap triggers a call.
- Failed capacitors and reversing valves. A furnace or heat pump that runs but never satisfies the thermostat usually traces to a failed capacitor, a blower motor on its last legs, or a reversing valve that won’t switch. These are common in newer Henderson homes with high-efficiency systems.
Pricing for Furnace Repair in Henderson, NV
A typical furnace repair in Henderson runs $150 – $700. Routine issues like a failed ignitor or capacitor tend to land near the low end, while a blower motor replacement, heat exchanger work, or a reversing-valve repair on a heat pump pushes toward the higher end. What affects the number: the age of the equipment, whether the problem is a single part or something compounding like a bad blower motor plus crushed ductwork, and whether the system is builder-grade stock sized incorrectly from the start. We give you a written price before any work starts, and estimates are free. For a heat pump call in 89052, expect the range to hold – the diagnosis just takes a little longer.
We Also Serve Cities Near Henderson
If you’re just outside Henderson, our Furnace Repair team also reaches Boulder City, Whitney, Paradise, and Enterprise. Same written price, same 365-Day Done Right Promise, same photo of the clean-up before the crew leaves. If you’re searching for Furnace Repair in Henderson and you’re near one of these neighboring towns, call (844) 320-2997 and we’ll tell you what we can do.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Henderson
Because original builder-grade equipment from that era is now 20 to 30 years old and has hit end-of-life. Furnaces in that tract stock around 89014 and 89015 were often sized by rule of thumb rather than a load calculation, so the heat exchanger and blower motor have been working harder than they should for years. Call (844) 320-2997 for a diagnosis and a written price.
Usually not, because most builder warranties cover the equipment for a limited window (often one to two years) and only if the unit was registered. Manufacturer parts warranties can extend further but frequently require registration within 60 days of installation, and gaps in that paperwork are common in Henderson’s newer subdivisions. We’ll check the model and serial numbers and tell you what’s likely still covered. Call (844) 320-2997 for a free estimate.
In the 89052 and 89012 area, a heat pump that runs but doesn’t heat is typically a defrost reversing-valve issue or failed auxiliary heat strips rather than a gas burner problem. Tight construction and high-efficiency equipment change the diagnosis. A technician starts with a static pressure and airflow check, then tests the reversing valve and strip circuit. Call (844) 320-2997 to schedule.
Furnace repair in Henderson typically costs $150 – $700. Simple part swaps sit near the low end; heat exchanger, blower motor, or reversing-valve work trends higher. We give a written price before any work begins. Call (844) 320-2997 for an exact quote – estimates are free.
If the system is original from the 1990s and the repair is a heat exchanger or blower motor, replacement is usually the better long-term call – especially when the equipment was sized incorrectly from the start. A failed capacitor or ignitor on a system with life left is worth fixing. We’ll give you both numbers in writing and let you decide. Call (844) 320-2997.
Ready to get the heat back on? Call Meadowsweet Heating & Air North Las Vegas at (844) 320-2997 for a free estimate on furnace repair in Henderson. A live person answers day or night, we’ll give you a written price before any work starts, and every job comes with shoe covers, drop cloths, and the 365-Day Done Right Promise.
Written by the team at Meadowsweet Heating & Air.